Liberty Floodlight Solid State (BKSSL) (LBF)

Category: Accent and Flood Lighting
Spec Sheet: Click to View

Liberty Floodlight Solid State (BKSSL) (LBF)

  • Manufactured within GreenSource Initiative™ guidelines.
  • Manufactured using renewable solar energy, produced onsite.
  • Returnable to manufacturer at end of life to ensure cradle to cradle handling.
  • Use of this product may qualify for GreenSource efficacy and recycling rebate(s).
  • Constructed from copper, bronze, and stainless steel. These lifetime materials are inherently corrosion resistant.
  • Hand spun from high purity, solid copper plate.
  • High temperature, silicone ‘O’ Ring provides water tight seal.
  • Shock resistant, tempered, glass lens is factory adhered to fixture cap and provides hermetically sealed optical compartment.
  • BKSSL™ Integrated solid state system with ‘X’ technology is scalable for field upgrade.
  • Modular design with electrical quick disconnects permit field maintenance.
  • LM-80 certified.
  • Minimum 50,000 hour rated life at 70% of initial lumens (L70).
  • BKSSL technology provides long life, significant energy reduction and exceptional thermal management.
  • Module exceeds 80 CRI (RA>80, R9>16).
  • Machined 1/2” NPT adaptor for mounting to suitable enclosure.
  • For use with remote LED driver. See remote driver submittal to determine remote distance and wiring requirements prior to detailing field installation of any remote wiring.
  • Interchangeable OPTIKIT™ modules permit field changes to optical distribution.
  • Teflon® coated, 18AWG, 600V, 250° C rated and certified to UL 1659 standard.
  • Tamper-resistant, stainless steel hardware.
  • Copper and Brass: Natural (NAT): Copper and brass components are sand blasted to expose the porous metal surface. Over time, and with exposure to the elements, the metals will naturally ‘weather’ resulting in a unique patina.
  • Also available with hand-crafted metal finishes including brown patina (BP), green patina (GP), polish (POL), and nickel plate (NIC).
  • Copper and brass components are also available in powder coat finishes.
  • Optional ceramic clear coat protection (copper and brass components only) seals and protects underlying metals and protects against discoloration, fading, and wear. Highly impervious to chemicals, solvents, and graffiti. For use with natural (NAT) and polish (POL) finishes.
  • Finish: Aluminum: StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating
  • Corrosion-free composite, made from high strength, thermo-formed, sheet molded polyester compound.  Glass reinforced, flame retardant and UV stabilized.  (2) bottom-entry, 3/4" NPT female conduit entries with knockout plugs and (4) side flats for 1/2" or 3/4"  conduit adapters.
  • Patented Stability Flange is corrosion-free and projects into installation sub-strate to reinforce housing stability. Integral REBAR saddles simplify installation onto concrete form. (4) Orthogonal bosses permit use of 1/2" PCV conduit or EMT to simplify vertical position and leveling of housing. Pre-set self-tapping screws anchor housing at proper elevation.
  • For direct burial in soil or concrete.  Consult Drainage Installation Guide for In-Grade Fixtures (DIG-IT) for compliance with proper soil preparation and drainage requirements prior to installation.
  • For use with [1] 700mA, Class A, constant current driver.  120-277VAC (nominal) primary input  voltage. 50/60Hz.
  • Dimming driver for use with standard incandescent dimmers. 10-100% range.
  • Teflon® coated wire, 18 gauge, 600V, 250°C rated and certified to UL1659 standard.  Features OptiLock® and gear tray quick disconnects.
  • Patented HydroLock® with anti-siphon valve (ASV™) wireway.  (3) Water-Tight connectors supplied for line connection.  Maximum (2) #10 & (1) #18. Minimum (1) #12 & (1) #18.
  • Self Evacuating Airtight Lamp Module (S.E.A.L.™).  IP-68 rated, vacuum sealed enclosure. Patented Anti-Condensation Valve (ACV™) eliminates condensation from optical chamber. High temperature silicone 'O' Ring at faceplate.
  • Patented HydroLock® technology provides fail safe water barrier between junction box and interior components. Anti-siphon valve (ASV™) prevents “wicking” through conductor insulation.
  • High heat, shock resistant, tempered 1/4" borosilicate flat glass lens.  Suitable for walk-over and drive-over applications to 35,000 lbs.
  • Solid faceplate, 1/2" machined 6061T6 aluminum with (5) black oxide, captive, stainless steel mounting screws.  Faceplate options include solid, 1/2" machined brass and solid, 1/2" machined stainless steel. Accessories are aluminum only.
  • StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class 'A' TGIC polyester powder coating.  Brass components are available in powder coat or handcrafted metal finish.  Stainless steel components are available in handcrafted metal finish.  (Brushed finish for interior use only).
  • 5 year limited warranty.
  • UL Listed. ITL tested to IESNA LM-79. Certified to CAN/CSA/ANSI Standards. 
  • Suitable for indoor or outdoor use.
  • Suitable for use in wet locations.
  • Suitable for installation within 4' of the ground.
  • RoHS compliant.
  • IP66 Rated.
  • us-flag

Product Catagories

Accent and Flood Lighting



Column Mount

Down Lighting

Path Lighting

Specialty Lighting


Have a Question? Contact Us

Cascade Lighting
3395 Miller Park Road, Suite 1
Akron, OH 44312
Toll Free: 1-800-758-6359
Phone: (330) 733-7070
Fax: (330) 733-4868