Category: Deck, Step and Brick Lighting
Spec Sheet: Click to View

HOUSING:  Body and mounting plate are cast aluminum construction.  Fasteners are 300 series stainless steel. 
FINISH:  Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.  Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications.  
OPTICAL ASSEMBLY:  Frosted, annealed glass lens  Reflector is a stamped specular aluminum. 
LAMPING:  10W maximum T3 bi-pin lamp.  Lower wattage lamps are acceptable.  10W T3 lamp is included with fixture.  
ELECTRICAL ASSEMBLY:  Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads.  12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire.  Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included.  12 Volt system requires remote transformer, not included. 
INSTALLATION & MOUNTING:  Two (2) Stainless #8 wood screws (supplied) via key slots. 
WARRANTY:  Three-year limited warranty. 
CERTIFICATIONS:  ETL listed to U.S. safety standards for wet locations.  cETL listed to Canadian safety standards for wet locations.  Manufactured to ISO 9001:2008 Standards. 
Height :  3 1/2" (89mm)
Width:  3 1/2" (89mm)
Depth:  1 7/8" (48mm)
Max. Weight:  0.30 lb


Ordering Guide
Example: DAL1  A 
Product Code
  DAL1 Aluminum Decklyte  
image A Black  
image B White  
image G Verde  
image H Bronze  
image T Speckled Stone  

Product Catagories

Accent and Flood Lighting


Deck, Step and Brick Lighting

Down Lighting

Inground and Well Lights

Path Lighting



Have a Question? Contact Us

Cascade Lighting
3395 Miller Park Road, Suite 1
Akron, OH 44312
Toll Free: 1-800-758-6359
Phone: (330) 733-7070
Fax: (330) 733-4868