Large Beacon Pillar Solid State (BKSSL) (LBL)

Manufacturer:
Category: Deck, Step and Brick Lighting
Spec Sheet: Click to View

Large Beacon Pillar Solid State (BKSSL) (LBL)

  • GreenSource Initiative™: Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced onsite. Returnable to manufacturer at end of life to ensure cradle-to-cradle handling. Packaging contains no chlorofluorocarbons (CFC’s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s).
  • Materials: Copper and Brass: Constructed from copper and brass. These enduring metals are inherently corrosion resistant.
  • Aluminum: Constructed from Copper-Free aluminum (Type 6061-T6 and cast Aluminum 360).
  • Ring Stack: Solid aluminum accent rings with aluminum spacers; brass or stainless steel accent rings with solid brass spacers. Stainless steel rings available in natural (NAT) finish only.
  • Installation: 8" diameter aluminum base with 304 stainless steel plate Mounts to a #36 anchor kit.
  • Shade: 27" Shade Hand spun from high purity ASTM 3003-H14 Aluminum or ASTM C101 Copper.
  • Dark Top Option: Hand Spun Aluminum- 3003, Copper- C101; eiminates light from upper window of the fixture.
  • Mesh Screen: Diffuses light in window. Not available with half shield. Finish to match fixture.
  • House Side Shield: Hand spun aluminum- 3003, copper- C101; eliminates light from half of the fixture.
  • Lens: 6” dia. frosted acrylic lens.
  • Cap: Top Cast Cap. 360  Aluminum or C836 Red Brass.
  • Base: Cast aluminum-360, cast brass C836. high temperature silicone gasket provides water tight seal to lens assembly.
  • BKSSL®: Integrated solid state system with ‘X’ technology is scalable for field upgrade.  Modular design with electrical quick disconnects permit field maintenance. Minimum 50,000 hour rated life at 70% of initial lumens (L70). BKSSL® technology provides long life, significant energy reduction and exceptional thermal management.
  • Color Management: Chip on board technology delivers natural white light. Exact color point conformity exceeds ANSI C78.377 standard. Module exceeds 80 CRI (RA>80, R9.16). Color point uniformity 2 SDCM color control for 2700K-4000K CCT. 
  • Driver (34W): [1] 1.05A (D34) (D34ARC) , Class A, constant current driver. 120-277VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, 30mA²S in-rush current, ≤20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery.  EMC: FCC47CFR Part 15 Class B compliant. Dimming driver for use with standard 0-10V dimmers and switch controls. 1-100% range or 0.1-100% (Refer to driver electrical data). D34 - 1-100% dimming range. D34ARC - 0.1-100% dimming range.
  • Wiring: Tefzel® coated stranded wire, 18GA, 600V, 150° C rated and certified to UL 1659 standard.
  • Hardware: Tamper-resistant, stainless steel hardware with black oxide finish.
  • Finish: Copper and Brass: Natural (NAT): Copper and brass components are sand blasted to expose the porous metal surface. Over time, and with exposure to the elements, the metals will naturally ‘weather’ resulting in a unique patina.
  • Also available with hand-crafted metal finishes including brown patina (BP), green patina (GP), polish (POL), and nickel plate (NIC).
  • Copper and brass components are also available in powder coat finishes.
  • Optional ceramic clear coat protection (copper and brass components only) seals and protects underlying metals and protects against discoloration, fading, and wear. Highly impervious to chemicals, solvents, and graffiti. For use with natural (NAT) and polish (POL) finishes.
  • Aluminum: StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating.
  • 5 year limited warranty.
  • UL tested to IESNA LM-79. UL Listed.
  • Certified to CAN/CSA/ANSI Standards.
  • RoHS compliant. Suitable for indoor or outdoor use. Suitable for use in wet locations. Additionally suitable for installation within 4’ of the ground.
  • IP66 Rated.
  • us-flag

*See spec sheet for complete details and available options*

 


TEKA
Product Catagories

Accent and Flood Lighting

Accessories

Bollards

Column Mount

Down Lighting

Path Lighting

Specialty Lighting

 

Have a Question? Contact Us

Cascade Lighting
3395 Miller Park Road, Suite 1
Akron, OH 44312
Toll Free: 1-800-758-6359
Phone: (330) 733-7070
Fax: (330) 733-4868