Category: Inground and Well Lights
Spec Sheet: Click to View

HOUSING:  Single-piece compression molded fiberglass reinforced polyester composite, factory pressure tested to ensure water will not wick or leak through.   Trim ring is a compression molded polyester. 
FINISH:  Composite is textured, pressure formed, molded-in-color. 
OPTICAL ASSEMBLY:  Clear convex, tempered soda-lime glass for high impact resistance.  2,200-pound live-load rated, standard walk-over lens.  Lamps have 15° articulation either side of vertical and 358° rotation without interruption of beam pattern.  
LAMPING:  75W maximum MR16 bi-pin lamp.  Covered MR16 are recommended to protect lamps inner capsule.  Lower wattage lamps are acceptable. 
ELECTRICAL ASSEMBLY:  Bi-pin socket type (GU5.3) with 250° C high temperature teflon coated wire leads.  12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1W wire.   Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included.  12 Volt system requires remote transformer, not included. 
WARRANTY:  Three-year limited warranty. 
CERTIFICATIONS:  ETL listed to U.S. safety standards for wet locations.  cETL listed to Canadian safety standards for wet locations.  Manufactured to ISO 9001:2008 Standards.  ADA Compliant when flush mounted with CP2 or CPS2. 
Height :  8 7/16" (214mm)
Width:  6 5/8" (169mm)
Max. Weight:  3.5 lb


Ordering Guide
Example: IL116  G  H 
Product Code
  IL116 Composite Inground  
Rock Guard
  G Rock Guard *2
image H Bronze  
image N Natural Brass *1
image SS Stainless steel (MATTE FINISH)  
*1 Natural Cast Bronze
*2 Rock Guard is not available in stainless steel.

Product Catagories

Accent and Flood Lighting


Deck, Step and Brick Lighting

Down Lighting

Inground and Well Lights

Path Lighting



Have a Question? Contact Us

Cascade Lighting
3395 Miller Park Road, Suite 1
Akron, OH 44312
Toll Free: 1-800-758-6359
Phone: (330) 733-7070
Fax: (330) 733-4868