•  Up-front cutter for snipping hard-to-reach wires.
•  Narrow nose for getting into tight boxes.
•  Wire looping holes in jaw.
•  Screw cutting stations are collapsed around the pivot – 20% less force is required.
•  Machined stripping stations with a positive stop provide precise stripping diameters.
•  Long, curved cutter blades reduce force required by 25% and can cut NM in single cut.
•  Smooth, rounded pivot bolt won’t catch in tool pouch or on other tools.
•  Comfortable, cushioned grips.
•  Note: This is not an insulated tool.

Specifications

• Strips 8-18 AWG solid, 10-22 AWG stranded
• Crimps 10-22 AWG insulated and non-insulated terminals
• Cuts #4-40, #6-32, #8-32, #10-24 and #10-32 screws
• Overall Length 8-1/2" (21.6 cm)