DWCL2-A

Manufacturer:
Category: Path Lighting
Spec Sheet: Click to View

Specifications
HOUSING:  Fasteners are 300 series stainless steel.  Gasketing is silicone.  Single-piece compression molded fiberglass reinforced polyester composite, factory pressure tested to ensure water will not wick or leak through.   Two (2) ½" conduit inlets at bottom.   Note: Watertight connectors and potting compound (by others) must be used to maintain a watertight seal at conduit entry points.  
FINISH:  Composite is textured, pressure formed, molded-in-color. 
OPTICAL ASSEMBLY:  Ribbed clear acrylic. 
ELECTRICAL ASSEMBLY:  Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads.  12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1W wire.   Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included.  12 Volt system requires remote transformer, not included. 
LAMPING:  20W maximum T3 bi-pin lamp.  Lamp is included with fixture.  Lower wattage lamps are acceptable. 
WARRANTY:  Ten-year limited warranty. 
CERTIFICATIONS:  ETL listed to U.S. safety standards for wet locations.  cETL listed to Canadian safety standards for wet locations.  Manufactured to ISO 9001:2008 Standards. 
Height :  7 3/8" (188mm)
Width:  5 5/16" (135mm)
Max. Weight:  2.5 lb.

 

Ordering Guide
Example: DWCL2  A 
Product Code
  DWCL2 Beacon  
Finish
image A Black  

Hadco
Product Catagories

Accent and Flood Lighting

Accessories

Deck, Step and Brick Lighting

Down Lighting

Inground and Well Lights

Path Lighting

Transformers

 

Have a Question? Contact Us

Cascade Lighting
3395 Miller Park Drive, Suite 1
Akron, OH 44312
Toll Free: 1-800-758-6359
Phone: (330) 733-7070
Fax: (330) 733-4868